TH8601

• AC test frequency: 50Hz-300kHz
• Maximum 128 pin for sweeping and testing
• Insulation resistance of more than IOG
• Cotex_M3 processor core

TH8601A

• AC test frequency: 50Hz-300kHz
• Cotex_M3 processor core
• Selectable Chinese and English operation interface
• Selectable RS232, RS485, GPIB, IJSB, LAN

TH8602-4

• Test Pin: 256 pin, four-terminal
• Built-in IOA independent DC current source
• 7" TFT LCD TrueColor display screen
• Firmware update through IJ disk

TH8602-3

• Test Pin: 192 pin, four-terminal test
• Built-in IOA independent DC current source
• 7" TFT LCD TrueColor display screen
• Testing resistance, capacitance

TH8602-2

• Test Pin: 128 pin, four-terminal test
• Built-in IOA independent DC current source
• Firmware update through U disk
• Excellent and reliable ARC detection

TH8602-1

• Test Pin: 64 pin, four-terminal test
• (Patent) High and low voltage separation technology
• Built-in IOA independent DC current
• Excellent and reliable ARC detection function Testing

TH8603-4

• Support U disk to store test files
• The program can be upgraded online via U disk
• Testing resistance, capacitance, diode and other components
• Provide excellent and reliable arc detection function

TH8602B

TH8602C

TH2829NX

• Frequency: 20Hz-200kHz,Resolution: 0.5mHz
• Built-in 0-100mA/0-10V bias power supply
• Single screen can accommodate all scan test
• Self-test scanning fixture relays

TH2829CX

• Frequency: 20Hz-1MHz, Resolution: 0.5mHz
• Improved DCR testing capabilities
• Single screen can accommodate all scan test
• Time stamping system: memory file setting

TH2829AX-48

• 7-inch TFT LCD display with a resolution
• Improved high turns ratio and weakly coupled
• Improved DCR testing capabilities
• Single screen can accommodate all scan test

TH2829AX-24

• 7-inch TFT LCD display with a resolution
• Diode forward and reverse characteristic
• Single screen can accommodate all scan test
• Single parameter test cycle

TH2829LX

• Number of Test PIN: 20
• 7-inch TFT LCD display with a resolution
• Diode forward and reverse characteristic
• Increased security: administrator and operator passwords

TH2837LX

TH2832XA

• Number of Test PIN: 24
• Network transformer scan test
• Relay drive coil, contact resistance multi-channle scan test Multi-channel DCR scan test
• Storage: Internal: 100 groups of settings file

TH2832XB

• 4.3 inch TFT LCD Display
• TH2832XA: LCR + transformer test system
• Switch transformer scan test
• Relay drive coil, contact resistance multi-channel scan test

TH2832XC

• TH2832XA: LCR + transformer test system
• Switch transformer scan test
• Relay drive coil, contact resistance multi-channel
• Storage: Internal: 100 groups of settings file to save

TH2840AX

• Graphical pin association setting
• Industry-friendly user experience: Linux bottom layer
• Lk setting does not need to input the leakage inductance pin
• Enhanced balance scanning function

TH2840BX

• 10.1 inch 1280x800 capacitive touch screen
• The bias voltage is built-in
• Enhanced balance scanning function
• Approximately 100M setting file storage space

TH2840NX

• Optional LCR function Approximately 100M setting file storage
• Graphical pin association setting
• Lk setting does not need
• Range switching adopts electronic switch

TH2883S8-5

• Four waveform comparison methods
• First winding tester compatible with LXI standard
• 20 test procedures can be added
• High bandwidth analog acquisition circuit

TH2883S4-5

• Measurements on voltage
• Each channel can be programmed
• High bandwidth analog acquisition circuit
• Four waveform comparison methods

TH2883-10

• 20 groups of instrument files can be stored
• Four waveform comparison methods
• Measurements on voltage, time and frequency
• Use demagnetized impulse

TH2883-5

• High-fidelity corona extraction algorithm (patent technology)
• Four waveform comparison methods
• First winding tester compatible with LXI standard
• 20 groups of instrument files

TH2883-1

• 20 groups of instrument files
• Low inductance impulse test: down to IPH
• First winding tester compatible with LXI standard
• Handler interface to realize on-line operation

TH2882AS-5

• Voltage, Time and Frequency measuring function
• Handler, RS-232C
• Low energy test without damaging the coil
• 500 groups of waveforms can be stored in USB disk

TH2882A-5

• 320x240 dot-matrix graphic
• 4 kinds of waveform comparison methods
• Voltage, Time and Frequency measuring function
• Handler, RS-232C, and GPIB(optional) interfaces

TH2882A-3

• Keyboard lock and password protection function
• Low energy test without damaging the coil
• 4 kinds of waveform comparison methods
• 320x240 dot-matrix graphic LCD

TH28831

• Work together with TH2883
• expand single channel to 10-channel
• 
  
  
• 
  
  

TH2518

• 4.3 inch 24-color touch LCD
• Temperature compensation function
• The adopted test end of the scan test channel is programmable
• Support 6 units for free insertion and removal

TH2518A

• Compatible with scanning and stand-alone measurement
• One-click screen capture function
• The adopted test end of the scan test channel
• Support 6 units for free insertion and removal

TH2516

• Multiple measurement combinations of R
• 30 groups of parameter files can be saved and loaded
• Data save function brings convenience
• Automatically update operation software through USB HOST

TH2516A

• 24 bits, 4.3-inch and 4-wire
• Multiple measurement combinations of R, LPR
• Data save function brings convenience
• 30 groups of parameter files can be saved and loaded

TH2516B

• Flexible and convenient file operation system
• 24 bits, 4.3-inch and 4-wire
• Multiple measurement combinations of R, LPR
• Automatically update operation software through USB HOST

TH2515

• Multiple measurement combinations of R, LPR
• Temperature compensation(TC)
• Screen information can be stored on U-disk
• Automatically update operation software through USB HOST

TH2512+

• Direct reading value and percentage error display
• Highest accuracy: ±0.05%
• Comparator: High, low, pass, and Beep
• Clear function: Clear all ranges in AUTO range

TH2512A+

• Clear function: Clear all ranges in AUTO range
• Highest accuracy: ±0.05%
• Comparator: High, low, pass, and Beep
• Direct reading value and percentage error display

TH2512B+

• Comparator: High, low, pass, and Beep
• Highest accuracy: ±0.05%
• Clear function: Clear all ranges in AUTO range
• Direct reading value and percentage error display

TH2511A

• The highest resistance accuracy: ±0.1%, resistance
• Upper super, lower super, qualified sorting
• 4 1/2 LED display, good stability
• Direct reading value and percentage error display

TH2523

• Information in screen stored in IJ disk
• 24-bit color 4.3 inch LCD display
• Graphic scanning and analysis for battery discharge
• 100 groups of file for storage and load

TH2523A

• 10 bin compare, High limit, low limit, pass
• Information in screen stored in U disk
• 24-bit color 4.3 inch LCD display
• Direct reading value and AO/O error display

TH2522

• Intelligent failure detection function
• Inpedance range: 10uQ - 500Q
• 100 groups of data can be stored in manual mode
• 35 groups of sorting data storage

TH2684

• 7 current ranges, manual or auto range mode
• Test voltage range: 10-500V
• Ultra-low leakage current test: minimum current
• Contact detection function for capacitive components

TH2684A

• The precharge voltage output can be set
• Test voltage range: 10-1 OOOV
• Contact detection function for capacitive components
• 7 current ranges, manual or auto range mode

TH2690A

• Interface: USB HOST, USB DEVICE, CAN, GPIB, RS232
• Measuring resistance up to 1 TQ
• Support voltage measurement up to 20V
• Time domain view, capture transient signal effects

TH2683A

• Firmware upgrade with USB
• Insulation resistance, leakage current dual display
• Contact checking for capacitive devices
• 20 groups of internal file, support USB storage

TH2683B

• 20 groups of internal file, support USB storage
• Insulation resistance, leakage current dual display
• Contact checking for capacitive
• 4.2 inch 24-color touch screen, resolution: 480272

TH2683

• IR test range: 100kQ - 10TQ, Test speed: 30ms
• Insulation resistance or current display
• Intelligent microcontroller control
• Interface: Handler and RS232(option)

TH2681A

• Test speed: impedance component:
• IR test range: 100kQ - 10TQ
• Adapt to the special requirements of capacitor testing
• Capacitive component: 0.5-1s

TH2681

• Test voltage range: 10 - 500V
• IR test range: 100kQ - 5TQ
• Test speed: impedance component: <0.5s
• Adapt to the special requirements of capacitor testing

TH2690

• Interface: USB HOST, USB DEVICE, CAN, GPIB, RS232
• Input impedance>200TQ
• Support voltage measurement up to 20V
• Temperature and humidity measurement

TH2691

TH2691A

TH1991

TH1992

TH1992B

TH2518

• Handler interface for online
• One-click screen capture function
• Temperature measurement can support P T 100
• 4.3 inch 24-color touch LCD screen with 480 x 272 resolution

TH2518A

• Automatic upgrade of instrument operating
• The adopted test end of the scan test channel
• Support 6 units for free insertion and removal
• Comparison sort results

TH2516

• Data save function brings convenience for saving
• Multiple measurement combinations of R, LPR
• Temperature compensation(TC)
• Simultaneously output compare results

TH2516A

• Offset voltage compensation(OVC)
• Handler interface realizes
• Screen information can be stored on I-I-disk
• Data save function brings convenience

TH2516B

• Multiple measurement combinations of R, LPR
• Customer self-correction(0 ADJ)
• Simultaneously output compare results
• Screen information can be stored on U-disk

TH2515

• Highest accuracy: 0.01%, resolution: 0. IpQ
• Intelligent detection for test state error
• 30 groups of parameter files can be saved and loaded
• Automatically update operation

TH2512+

• the current range when the range is locked
• Highest accuracy: ±0.05%
• Comparator: High, low, pass, and Beep
• Clear function: Clear all ranges in AUTO range

TH2512A+

• Maximum resolution: 10uQ
• Comparator: High, low, pass, and Beep
• Clear function: Clear all ranges in AUTO range
• Direct reading value and percentage error display

TH2512B+

• Direct reading value and percentage error display
• Highest accuracy: ±0.1%
• Comparator: High, low, pass, and Beep
• Clear function: Clear all ranges in AUTO range

TH2511A

• Direct reading value and percentage error display
• Resistance range: 10pQ-1.999kQ
• The highest resistance accuracy: ±0.1%
• Upper super, lower super, qualified sorting

TH2523

• RS232 USB HOST USB Device
• Voltage accuracy: 0.05%, resolution: 100uV
• Information in screen stored in IJ disk
• Direct reading value and A% error display

TH2523A

• Information in screen stored in U disk
• Voltage accuracy: 0.05%, resolution: 100uV
• 24-bit color 4.3 inch LCD display
• Graphic scanning and analysis for battery

TH2522

• Firmware upgrad through mini-USB
• Voltage accuracy: 0.1%
• Manual/auto mode store test result
• 500 groups of data can be stored